GearAid Aquashure FD Urethane Repair Adhesive 2x 7g
Product no.: 11269004
In stock
Description
Adhesive for PU-coated textiles.
2 small 7g tubes for two bonds with time lag.
The glue dries out in a few days after opening a tube.
Therefore, it is sometimes better to have two small tubes.
Adhesive for PU-coated textiles.
2 small 7g tubes for two bonds with time lag.
The glue dries out in a few days after opening a tube.
Therefore, it is sometimes better to have two small tubes.
Sticks Cordura spraydecks, all tents, bags, buoyancy bodies that are waterproof coated with PU.
Apply Aquashure directly from the tube or with a brush on the cleaned surfaces.
Allow to dry for at least 10-14 hours.
Holes and cracks:
Stick with peelable adhesive tape behind.
Fill damaged area 5mm above the edges with Aquasure.
Remove adhesive tape only after complete drying.
seams:
Apply a 2mm wide drop at least 5mm beyond the seam edges.
Press lightly so that the fabric surfaces and the thread can soak up.
2 tubes with 7g glue, screw cap and brush.
Milky white transparent.
2 small 7g tubes for two bonds with time lag.
The glue dries out in a few days after opening a tube.
Therefore, it is sometimes better to have two small tubes.
Sticks Cordura spraydecks, all tents, bags, buoyancy bodies that are waterproof coated with PU.
Apply Aquashure directly from the tube or with a brush on the cleaned surfaces.
Allow to dry for at least 10-14 hours.
Holes and cracks:
Stick with peelable adhesive tape behind.
Fill damaged area 5mm above the edges with Aquasure.
Remove adhesive tape only after complete drying.
seams:
Apply a 2mm wide drop at least 5mm beyond the seam edges.
Press lightly so that the fabric surfaces and the thread can soak up.
2 tubes with 7g glue, screw cap and brush.
Milky white transparent.